{"id":4579,"date":"2012-05-01T11:06:37","date_gmt":"2012-05-01T18:06:37","guid":{"rendered":"https:\/\/blogs.infoblox.com\/?p=4579"},"modified":"2020-05-06T10:31:43","modified_gmt":"2020-05-06T17:31:43","slug":"using-gns3-to-model-a-simple-ipv6-network-part-2","status":"publish","type":"post","link":"https:\/\/www.infoblox.com\/blog\/ipv6-coe\/using-gns3-to-model-a-simple-ipv6-network-part-2\/","title":{"rendered":"Using GNS3 to Model a Simple IPv6 Network (part 2)"},"content":{"rendered":"

SLAAC in Action<\/strong><\/p>\n

Let\u2019s take a look at the auto-addressing functionality built in to IPv6: Stateless Address Autoconfiguration\u2013or SLAAC.<\/p>\n

Using GNS3 (covered in the last post), create a simple topology of one router and one host connected via Fast Ethernet:<\/p>\n

\"Using<\/p>\n

Make sure QEMU or VPCS is running:<\/p>\n

\"Using<\/p>\n

Start the router then enable IPv6 unicast routing globally. On the Fast Ethernet interface the host is connected to, enable IPv6 and add an IPv6 address from the global unicast range (2000::\/3). The particular prefix is unimportant\u2013just make sure you use a \/64 prefix so that SLAAC will function properly.<\/p>\n

\"Using<\/p>\n

On the QEMU or VPCS host make sure \u2018ip auto\u2019 is configured (it should be by default) then run the \u2018show\u2019 command. Assuming everything worked you should see a SLAAC-assigned address beginning with the global unicast prefix you assigned on the router interface:<\/p>\n

\"Using<\/p>\n

Now from the host, ping the router interface address you assigned:<\/p>\n

\"Using<\/p>\n

Finally, let\u2019s run a few verification commands on the router:<\/p>\n

\"Using<\/p>\n

Recall that the auto-addressing functionality of SLAAC is included entirely within the IPv6 protocol standard. One should thus expect the same behavior observed in this configuration example regardless of the particular hardware and software used for the router and host.<\/p>\n

For the next post in this series we\u2019ll use the packet capture tool Wireshark to look at the \u00a0SLAAC process in more detail.<\/p>\n","protected":false},"excerpt":{"rendered":"

SLAAC in Action Let\u2019s take a look at the auto-addressing functionality built in to IPv6: Stateless Address Autoconfiguration\u2013or SLAAC. Using GNS3 (covered in the last post), create a simple topology of one router and one host connected via Fast Ethernet: Make sure QEMU or VPCS is running: Start the router then enable IPv6 unicast routing […]<\/p>\n","protected":false},"author":319,"featured_media":3187,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"inline_featured_image":false,"_genesis_hide_title":false,"_genesis_hide_breadcrumbs":false,"_genesis_hide_singular_image":false,"_genesis_hide_footer_widgets":false,"_genesis_custom_body_class":"","_genesis_custom_post_class":"","_genesis_layout":"","footnotes":""},"categories":[17],"tags":[16,56,38,15,179],"class_list":{"0":"post-4579","1":"post","2":"type-post","3":"status-publish","4":"format-standard","5":"has-post-thumbnail","7":"category-ipv6-coe","8":"tag-infoblox","9":"tag-ipv4","10":"tag-ipv6","11":"tag-security","12":"tag-slaac","13":"entry"},"acf":[],"yoast_head":"\nUsing GNS3 to Model a Simple IPv6 Network (part 2)<\/title>\n<meta name=\"description\" content=\"Let\u2019s take a look at the auto-addressing functionality built in to IPv6: Stateless Address Autoconfiguration\u2013or SLAAC.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.infoblox.com\/blog\/ipv6-coe\/using-gns3-to-model-a-simple-ipv6-network-part-2\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Using GNS3 to Model a Simple IPv6 Network (part 2)\" \/>\n<meta property=\"og:description\" content=\"Let\u2019s take a look at the auto-addressing functionality built in to IPv6: Stateless Address Autoconfiguration\u2013or SLAAC.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.infoblox.com\/blog\/ipv6-coe\/using-gns3-to-model-a-simple-ipv6-network-part-2\/\" \/>\n<meta property=\"og:site_name\" content=\"Infoblox Blog\" \/>\n<meta property=\"article:published_time\" content=\"2012-05-01T18:06:37+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2020-05-06T17:31:43+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.infoblox.com\/blog\/wp-content\/uploads\/IPv6-ARIN.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"660\" \/>\n\t<meta property=\"og:image:height\" content=\"454\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Tom Coffeen\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Tom Coffeen\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"1 minute\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.infoblox.com\\\/blog\\\/ipv6-coe\\\/using-gns3-to-model-a-simple-ipv6-network-part-2\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.infoblox.com\\\/blog\\\/ipv6-coe\\\/using-gns3-to-model-a-simple-ipv6-network-part-2\\\/\"},\"author\":{\"name\":\"Tom Coffeen\",\"@id\":\"https:\\\/\\\/www.infoblox.com\\\/blog\\\/#\\\/schema\\\/person\\\/b299068ee4a9f542d2ad7d59a5b1d5b1\"},\"headline\":\"Using GNS3 to Model a Simple IPv6 Network (part 2)\",\"datePublished\":\"2012-05-01T18:06:37+00:00\",\"dateModified\":\"2020-05-06T17:31:43+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.infoblox.com\\\/blog\\\/ipv6-coe\\\/using-gns3-to-model-a-simple-ipv6-network-part-2\\\/\"},\"wordCount\":236,\"publisher\":{\"@id\":\"https:\\\/\\\/www.infoblox.com\\\/blog\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/www.infoblox.com\\\/blog\\\/ipv6-coe\\\/using-gns3-to-model-a-simple-ipv6-network-part-2\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.infoblox.com\\\/blog\\\/wp-content\\\/uploads\\\/IPv6-ARIN.jpg\",\"keywords\":[\"Infoblox\",\"IPv4\",\"IPv6\",\"Security\",\"SLAAC\"],\"articleSection\":[\"IPv6 CoE\"],\"inLanguage\":\"en-US\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.infoblox.com\\\/blog\\\/ipv6-coe\\\/using-gns3-to-model-a-simple-ipv6-network-part-2\\\/\",\"url\":\"https:\\\/\\\/www.infoblox.com\\\/blog\\\/ipv6-coe\\\/using-gns3-to-model-a-simple-ipv6-network-part-2\\\/\",\"name\":\"Using GNS3 to Model a Simple IPv6 Network (part 2)\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.infoblox.com\\\/blog\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.infoblox.com\\\/blog\\\/ipv6-coe\\\/using-gns3-to-model-a-simple-ipv6-network-part-2\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.infoblox.com\\\/blog\\\/ipv6-coe\\\/using-gns3-to-model-a-simple-ipv6-network-part-2\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.infoblox.com\\\/blog\\\/wp-content\\\/uploads\\\/IPv6-ARIN.jpg\",\"datePublished\":\"2012-05-01T18:06:37+00:00\",\"dateModified\":\"2020-05-06T17:31:43+00:00\",\"description\":\"Let\u2019s take a look at the auto-addressing functionality built in to IPv6: Stateless Address Autoconfiguration\u2013or SLAAC.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.infoblox.com\\\/blog\\\/ipv6-coe\\\/using-gns3-to-model-a-simple-ipv6-network-part-2\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.infoblox.com\\\/blog\\\/ipv6-coe\\\/using-gns3-to-model-a-simple-ipv6-network-part-2\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.infoblox.com\\\/blog\\\/ipv6-coe\\\/using-gns3-to-model-a-simple-ipv6-network-part-2\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.infoblox.com\\\/blog\\\/wp-content\\\/uploads\\\/IPv6-ARIN.jpg\",\"contentUrl\":\"https:\\\/\\\/www.infoblox.com\\\/blog\\\/wp-content\\\/uploads\\\/IPv6-ARIN.jpg\",\"width\":660,\"height\":454,\"caption\":\"The IPv6 Tipping Point Effect\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.infoblox.com\\\/blog\\\/ipv6-coe\\\/using-gns3-to-model-a-simple-ipv6-network-part-2\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.infoblox.com\\\/blog\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"IPv6 CoE\",\"item\":\"https:\\\/\\\/www.infoblox.com\\\/blog\\\/category\\\/ipv6-coe\\\/\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"Using GNS3 to Model a Simple IPv6 Network (part 2)\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.infoblox.com\\\/blog\\\/#website\",\"url\":\"https:\\\/\\\/www.infoblox.com\\\/blog\\\/\",\"name\":\"infoblox.com\\\/blog\\\/\",\"description\":\"\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.infoblox.com\\\/blog\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.infoblox.com\\\/blog\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.infoblox.com\\\/blog\\\/#organization\",\"name\":\"Infoblox\",\"url\":\"https:\\\/\\\/www.infoblox.com\\\/blog\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.infoblox.com\\\/blog\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.infoblox.com\\\/blog\\\/wp-content\\\/uploads\\\/infoblox-logo-2.svg\",\"contentUrl\":\"https:\\\/\\\/www.infoblox.com\\\/blog\\\/wp-content\\\/uploads\\\/infoblox-logo-2.svg\",\"width\":137,\"height\":30,\"caption\":\"Infoblox\"},\"image\":{\"@id\":\"https:\\\/\\\/www.infoblox.com\\\/blog\\\/#\\\/schema\\\/logo\\\/image\\\/\"}},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.infoblox.com\\\/blog\\\/#\\\/schema\\\/person\\\/b299068ee4a9f542d2ad7d59a5b1d5b1\",\"name\":\"Tom Coffeen\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/blogs.infoblox.com\\\/wp-content\\\/uploads\\\/avatar_user_319_1574118081-96x96.jpg\",\"url\":\"https:\\\/\\\/blogs.infoblox.com\\\/wp-content\\\/uploads\\\/avatar_user_319_1574118081-96x96.jpg\",\"contentUrl\":\"https:\\\/\\\/blogs.infoblox.com\\\/wp-content\\\/uploads\\\/avatar_user_319_1574118081-96x96.jpg\",\"caption\":\"Tom Coffeen\"},\"description\":\"Tom Coffeen is a network engineer, architect, and author with over twenty years of internetwork design, deployment, administration, and management experience. Tom co-founded HexaBuild, an IT consultancy specializing in the advancement of cloud, IoT, and security deployment best practices through IPv6 adoption. Prior to co-founding HexaBuild, Tom was an IPv6 Evangelist and a Distinguished Architect at Infoblox. Before that Tom was the VP of network architecture at the global CDN Limelight Networks where he led their deployment of IPv6. He is also the author of O\u2019Reilly Media\u2019s IPv6 Address Planning.\",\"url\":\"https:\\\/\\\/www.infoblox.com\\\/blog\\\/author\\\/tom-coffeen\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"Using GNS3 to Model a Simple IPv6 Network (part 2)","description":"Let\u2019s take a look at the auto-addressing functionality built in to IPv6: Stateless Address Autoconfiguration\u2013or SLAAC.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.infoblox.com\/blog\/ipv6-coe\/using-gns3-to-model-a-simple-ipv6-network-part-2\/","og_locale":"en_US","og_type":"article","og_title":"Using GNS3 to Model a Simple IPv6 Network (part 2)","og_description":"Let\u2019s take a look at the auto-addressing functionality built in to IPv6: Stateless Address Autoconfiguration\u2013or SLAAC.","og_url":"https:\/\/www.infoblox.com\/blog\/ipv6-coe\/using-gns3-to-model-a-simple-ipv6-network-part-2\/","og_site_name":"Infoblox Blog","article_published_time":"2012-05-01T18:06:37+00:00","article_modified_time":"2020-05-06T17:31:43+00:00","og_image":[{"width":660,"height":454,"url":"https:\/\/www.infoblox.com\/blog\/wp-content\/uploads\/IPv6-ARIN.jpg","type":"image\/jpeg"}],"author":"Tom Coffeen","twitter_card":"summary_large_image","twitter_misc":{"Written by":"Tom Coffeen","Est. reading time":"1 minute"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.infoblox.com\/blog\/ipv6-coe\/using-gns3-to-model-a-simple-ipv6-network-part-2\/#article","isPartOf":{"@id":"https:\/\/www.infoblox.com\/blog\/ipv6-coe\/using-gns3-to-model-a-simple-ipv6-network-part-2\/"},"author":{"name":"Tom Coffeen","@id":"https:\/\/www.infoblox.com\/blog\/#\/schema\/person\/b299068ee4a9f542d2ad7d59a5b1d5b1"},"headline":"Using GNS3 to Model a Simple IPv6 Network (part 2)","datePublished":"2012-05-01T18:06:37+00:00","dateModified":"2020-05-06T17:31:43+00:00","mainEntityOfPage":{"@id":"https:\/\/www.infoblox.com\/blog\/ipv6-coe\/using-gns3-to-model-a-simple-ipv6-network-part-2\/"},"wordCount":236,"publisher":{"@id":"https:\/\/www.infoblox.com\/blog\/#organization"},"image":{"@id":"https:\/\/www.infoblox.com\/blog\/ipv6-coe\/using-gns3-to-model-a-simple-ipv6-network-part-2\/#primaryimage"},"thumbnailUrl":"https:\/\/www.infoblox.com\/blog\/wp-content\/uploads\/IPv6-ARIN.jpg","keywords":["Infoblox","IPv4","IPv6","Security","SLAAC"],"articleSection":["IPv6 CoE"],"inLanguage":"en-US"},{"@type":"WebPage","@id":"https:\/\/www.infoblox.com\/blog\/ipv6-coe\/using-gns3-to-model-a-simple-ipv6-network-part-2\/","url":"https:\/\/www.infoblox.com\/blog\/ipv6-coe\/using-gns3-to-model-a-simple-ipv6-network-part-2\/","name":"Using GNS3 to Model a Simple IPv6 Network (part 2)","isPartOf":{"@id":"https:\/\/www.infoblox.com\/blog\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.infoblox.com\/blog\/ipv6-coe\/using-gns3-to-model-a-simple-ipv6-network-part-2\/#primaryimage"},"image":{"@id":"https:\/\/www.infoblox.com\/blog\/ipv6-coe\/using-gns3-to-model-a-simple-ipv6-network-part-2\/#primaryimage"},"thumbnailUrl":"https:\/\/www.infoblox.com\/blog\/wp-content\/uploads\/IPv6-ARIN.jpg","datePublished":"2012-05-01T18:06:37+00:00","dateModified":"2020-05-06T17:31:43+00:00","description":"Let\u2019s take a look at the auto-addressing functionality built in to IPv6: Stateless Address Autoconfiguration\u2013or SLAAC.","breadcrumb":{"@id":"https:\/\/www.infoblox.com\/blog\/ipv6-coe\/using-gns3-to-model-a-simple-ipv6-network-part-2\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.infoblox.com\/blog\/ipv6-coe\/using-gns3-to-model-a-simple-ipv6-network-part-2\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.infoblox.com\/blog\/ipv6-coe\/using-gns3-to-model-a-simple-ipv6-network-part-2\/#primaryimage","url":"https:\/\/www.infoblox.com\/blog\/wp-content\/uploads\/IPv6-ARIN.jpg","contentUrl":"https:\/\/www.infoblox.com\/blog\/wp-content\/uploads\/IPv6-ARIN.jpg","width":660,"height":454,"caption":"The IPv6 Tipping Point Effect"},{"@type":"BreadcrumbList","@id":"https:\/\/www.infoblox.com\/blog\/ipv6-coe\/using-gns3-to-model-a-simple-ipv6-network-part-2\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.infoblox.com\/blog\/"},{"@type":"ListItem","position":2,"name":"IPv6 CoE","item":"https:\/\/www.infoblox.com\/blog\/category\/ipv6-coe\/"},{"@type":"ListItem","position":3,"name":"Using GNS3 to Model a Simple IPv6 Network (part 2)"}]},{"@type":"WebSite","@id":"https:\/\/www.infoblox.com\/blog\/#website","url":"https:\/\/www.infoblox.com\/blog\/","name":"infoblox.com\/blog\/","description":"","publisher":{"@id":"https:\/\/www.infoblox.com\/blog\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.infoblox.com\/blog\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/www.infoblox.com\/blog\/#organization","name":"Infoblox","url":"https:\/\/www.infoblox.com\/blog\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.infoblox.com\/blog\/#\/schema\/logo\/image\/","url":"https:\/\/www.infoblox.com\/blog\/wp-content\/uploads\/infoblox-logo-2.svg","contentUrl":"https:\/\/www.infoblox.com\/blog\/wp-content\/uploads\/infoblox-logo-2.svg","width":137,"height":30,"caption":"Infoblox"},"image":{"@id":"https:\/\/www.infoblox.com\/blog\/#\/schema\/logo\/image\/"}},{"@type":"Person","@id":"https:\/\/www.infoblox.com\/blog\/#\/schema\/person\/b299068ee4a9f542d2ad7d59a5b1d5b1","name":"Tom Coffeen","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/blogs.infoblox.com\/wp-content\/uploads\/avatar_user_319_1574118081-96x96.jpg","url":"https:\/\/blogs.infoblox.com\/wp-content\/uploads\/avatar_user_319_1574118081-96x96.jpg","contentUrl":"https:\/\/blogs.infoblox.com\/wp-content\/uploads\/avatar_user_319_1574118081-96x96.jpg","caption":"Tom Coffeen"},"description":"Tom Coffeen is a network engineer, architect, and author with over twenty years of internetwork design, deployment, administration, and management experience. Tom co-founded HexaBuild, an IT consultancy specializing in the advancement of cloud, IoT, and security deployment best practices through IPv6 adoption. Prior to co-founding HexaBuild, Tom was an IPv6 Evangelist and a Distinguished Architect at Infoblox. Before that Tom was the VP of network architecture at the global CDN Limelight Networks where he led their deployment of IPv6. He is also the author of O\u2019Reilly Media\u2019s IPv6 Address Planning.","url":"https:\/\/www.infoblox.com\/blog\/author\/tom-coffeen\/"}]}},"_links":{"self":[{"href":"https:\/\/www.infoblox.com\/blog\/wp-json\/wp\/v2\/posts\/4579","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.infoblox.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.infoblox.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.infoblox.com\/blog\/wp-json\/wp\/v2\/users\/319"}],"replies":[{"embeddable":true,"href":"https:\/\/www.infoblox.com\/blog\/wp-json\/wp\/v2\/comments?post=4579"}],"version-history":[{"count":1,"href":"https:\/\/www.infoblox.com\/blog\/wp-json\/wp\/v2\/posts\/4579\/revisions"}],"predecessor-version":[{"id":4586,"href":"https:\/\/www.infoblox.com\/blog\/wp-json\/wp\/v2\/posts\/4579\/revisions\/4586"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.infoblox.com\/blog\/wp-json\/wp\/v2\/media\/3187"}],"wp:attachment":[{"href":"https:\/\/www.infoblox.com\/blog\/wp-json\/wp\/v2\/media?parent=4579"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.infoblox.com\/blog\/wp-json\/wp\/v2\/categories?post=4579"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.infoblox.com\/blog\/wp-json\/wp\/v2\/tags?post=4579"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}